Abstract
We present a resonant MEMS sensor for viscosity and mass density measurements of liquids. The device is based on Lorentz-force excitation and has an integrated piezoresistive readout. The sensing element is a rectangular vibrating plate suspended by four beam springs. Due to in-plane vibrations, the plate contribution to the overall damping is low. Additionally, the plate increases the moving mass of the sensor and therefore the quality factor of the resonant system. Two of the plate-carrying springs comprise piezoresistors. With two additional resistors on the silicon rim, they form a half Wheatstone-bridge. Through the conductive layer of the beam springs a sinusoidal excitation current is driven. In the field of a permanent magnet, the Lorentz force excites plate vibrations resulting in a bridge unbalance. The sensor was experimentally tested with glycerol-water mixtures at constant temperature. We recorded both the frequency and the phase of the bridge output. By evaluating the properties of the resonant system, it is possible to extract the viscosity and the mass density of the mixtures simultaneously.
Original language | English |
---|---|
Title of host publication | Proceedings SPIE Volume 8066: Smart Sensors, Actuators, and MEMS V |
Editors | SPIE |
Pages | 80662E-1-80662E-8 |
Number of pages | 8 |
Volume | 8066 |
Publication status | Published - Apr 2011 |
Fields of science
- 203017 Micromechanics
- 202019 High frequency engineering
- 202028 Microelectronics
- 202039 Theoretical electrical engineering
- 202037 Signal processing
- 202027 Mechatronics
- 202036 Sensor systems
JKU Focus areas
- Mechatronics and Information Processing