Flatness based control of an injection moulding machine

Sven-Olaf Lindert; Kurt Schlacher; Gerald Reindl

doi:10.1007/978-3-642-53862-9_36

Flatness based control of an injection moulding machine

Sven-Olaf Lindert
, Kurt Schlacher
, Gerald Reindl

Institute of Control Systems

Research output: Chapter in Book/Report/Conference proceeding › Conference proceedings › peer-review

Abstract

This contribution deals with the modelling and control of an injection moulding process. In injection moulding especially the appearance of a work piece depends much on the exact compliance with certain trajectories of temperature or pressure in the mould. First a mathematical is presented, which turns out to be input to state linearisable resp. differentially flat. So trajectory planning is easily feasible and a flatness based controller is presented. Since the parameters of the process depend on the actual form of the work piece and the several pieces which are manufactured on one machine differ from each other an automatic identification of the interesting parameters is desirable.

Original language	English
Title of host publication	Computer Aided Systems Theory - EUROCAST 2013
Editors	Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia
Publisher	Springer
Pages	279-288
Number of pages	10
ISBN (Print)	978-3-642-53861-2
DOIs	https://doi.org/10.1007/978-3-642-53862-9_36
Publication status	Published - 2013

Publication series

Name	Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
Number	PART 2
Volume	8112 LNCS
ISSN (Print)	0302-9743
ISSN (Electronic)	1611-3349

Fields of science

102009 Computer simulation
203 Mechanical Engineering
202034 Control engineering
202 Electrical Engineering, Electronics, Information Engineering
202027 Mechatronics
202003 Automation

JKU Focus areas

Mechatronics and Information Processing

Access to Document

10.1007/978-3-642-53862-9_36

Cite this

Lindert, S.-O., Schlacher, K., & Reindl, G. (2013). Flatness based control of an injection moulding machine. In Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia (Ed.), Computer Aided Systems Theory - EUROCAST 2013 (pp. 279-288). (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 8112 LNCS, No. PART 2). Springer. https://doi.org/10.1007/978-3-642-53862-9_36

Lindert, Sven-Olaf ; Schlacher, Kurt ; Reindl, Gerald. / Flatness based control of an injection moulding machine. Computer Aided Systems Theory - EUROCAST 2013. editor / Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia. Springer, 2013. pp. 279-288 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); PART 2).

@inproceedings{a9499d914ca040e291420c5cd40e7218,

title = "Flatness based control of an injection moulding machine",

abstract = "This contribution deals with the modelling and control of an injection moulding process. In injection moulding especially the appearance of a work piece depends much on the exact compliance with certain trajectories of temperature or pressure in the mould. First a mathematical is presented, which turns out to be input to state linearisable resp. differentially flat. So trajectory planning is easily feasible and a flatness based controller is presented. Since the parameters of the process depend on the actual form of the work piece and the several pieces which are manufactured on one machine differ from each other an automatic identification of the interesting parameters is desirable.",

author = "Sven-Olaf Lindert and Kurt Schlacher and Gerald Reindl",

year = "2013",

doi = "10.1007/978-3-642-53862-9\_36",

language = "English",

isbn = "978-3-642-53861-2",

series = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",

publisher = "Springer",

number = "PART 2",

pages = "279--288",

editor = "\{Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia\}",

booktitle = "Computer Aided Systems Theory - EUROCAST 2013",

}

Lindert, S-O, Schlacher, K & Reindl, G 2013, Flatness based control of an injection moulding machine. in Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia (ed.), Computer Aided Systems Theory - EUROCAST 2013. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), no. PART 2, vol. 8112 LNCS, Springer, pp. 279-288. https://doi.org/10.1007/978-3-642-53862-9_36

Flatness based control of an injection moulding machine. / Lindert, Sven-Olaf; Schlacher, Kurt; Reindl, Gerald.
Computer Aided Systems Theory - EUROCAST 2013. ed. / Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia. Springer, 2013. p. 279-288 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 8112 LNCS, No. PART 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference proceedings › peer-review

TY - GEN

T1 - Flatness based control of an injection moulding machine

AU - Lindert, Sven-Olaf

AU - Schlacher, Kurt

AU - Reindl, Gerald

PY - 2013

Y1 - 2013

N2 - This contribution deals with the modelling and control of an injection moulding process. In injection moulding especially the appearance of a work piece depends much on the exact compliance with certain trajectories of temperature or pressure in the mould. First a mathematical is presented, which turns out to be input to state linearisable resp. differentially flat. So trajectory planning is easily feasible and a flatness based controller is presented. Since the parameters of the process depend on the actual form of the work piece and the several pieces which are manufactured on one machine differ from each other an automatic identification of the interesting parameters is desirable.

AB - This contribution deals with the modelling and control of an injection moulding process. In injection moulding especially the appearance of a work piece depends much on the exact compliance with certain trajectories of temperature or pressure in the mould. First a mathematical is presented, which turns out to be input to state linearisable resp. differentially flat. So trajectory planning is easily feasible and a flatness based controller is presented. Since the parameters of the process depend on the actual form of the work piece and the several pieces which are manufactured on one machine differ from each other an automatic identification of the interesting parameters is desirable.

UR - https://www.scopus.com/pages/publications/84892617623

U2 - 10.1007/978-3-642-53862-9_36

DO - 10.1007/978-3-642-53862-9_36

M3 - Conference proceedings

SN - 978-3-642-53861-2

T3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

SP - 279

EP - 288

BT - Computer Aided Systems Theory - EUROCAST 2013

A2 - Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia, null

PB - Springer

ER -

Lindert SO, Schlacher K, Reindl G. Flatness based control of an injection moulding machine. In Roberto Moreno-Diaz, Franz Pichler, Alexis Quesada-Arencibia, editor, Computer Aided Systems Theory - EUROCAST 2013. Springer. 2013. p. 279-288. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); PART 2). doi: 10.1007/978-3-642-53862-9_36

Flatness based control of an injection moulding machine

Abstract

Publication series

Fields of science

JKU Focus areas

Access to Document

Other files and links

Cite this