Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator

Carlos Madariaga; Werner Jara; Juan A. Tapia; Javier Riedemann; Gerd Bramerdorfer; Pablo Castro; Bulent Sarlioglu

doi:10.1109/ECCE.2019.8913171

Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator

Carlos Madariaga
, Werner Jara
, Juan A. Tapia
, Javier Riedemann
, Gerd Bramerdorfer
, Pablo Castro
, Bulent Sarlioglu

Institute of Electric Machines and Power Electronics

Research output: Chapter in Book/Report/Conference proceeding › Conference proceedings › peer-review

Abstract

This paper presents an analytical model of U-shape tooth-coil-winding modular permanent magnet synchronous machines (TCW-MPMSMs) in terms of main design parameters. Analytical expressions for the flux density distribution, back EMF, and electromagnetic torque were derived. 2-D finite element (FE) simulations for a 24-slot 28-pole machine for several tooth tip widths were compared to validate the proposed equations. Comparison of analytical solutions and FE results showed good agreement for a range of feasible slot openings. Also, a sensitivity analysis through the analytical expressions was developed. By using proposed analytical models, the performance of the modular machine can be significantly improved by selecting optimum values of key parameters including the dimensions of tooth tips and PMs.

Original language	English
Title of host publication	IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA
Pages	1761-1768
Number of pages	8
ISBN (Electronic)	9781728103952
DOIs	https://doi.org/10.1109/ECCE.2019.8913171
Publication status	Published - Sept 2019

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Fields of science

202 Electrical Engineering, Electronics, Information Engineering
202009 Electrical drive engineering
202011 Electrical machines
202025 Power electronics
202027 Mechatronics

JKU Focus areas

Digital Transformation
Sustainable Development: Responsible Technologies and Management

Access to Document

10.1109/ECCE.2019.8913171

Cite this

Madariaga, C., Jara, W., Tapia, J. A., Riedemann, J., Bramerdorfer, G., Castro, P., & Sarlioglu, B. (2019). Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator. In IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA (pp. 1761-1768). Article 8913171 https://doi.org/10.1109/ECCE.2019.8913171

@inproceedings{170ab01c690c456db125b7d64a0c161a,

title = "Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator",

abstract = "This paper presents an analytical model of U-shape tooth-coil-winding modular permanent magnet synchronous machines (TCW-MPMSMs) in terms of main design parameters. Analytical expressions for the flux density distribution, back EMF, and electromagnetic torque were derived. 2-D finite element (FE) simulations for a 24-slot 28-pole machine for several tooth tip widths were compared to validate the proposed equations. Comparison of analytical solutions and FE results showed good agreement for a range of feasible slot openings. Also, a sensitivity analysis through the analytical expressions was developed. By using proposed analytical models, the performance of the modular machine can be significantly improved by selecting optimum values of key parameters including the dimensions of tooth tips and PMs.",

author = "Carlos Madariaga and Werner Jara and Tapia, \{Juan A.\} and Javier Riedemann and Gerd Bramerdorfer and Pablo Castro and Bulent Sarlioglu",

year = "2019",

month = sep,

doi = "10.1109/ECCE.2019.8913171",

language = "English",

pages = "1761--1768",

booktitle = "IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA",

}

Madariaga, C, Jara, W, Tapia, JA, Riedemann, J, Bramerdorfer, G, Castro, P & Sarlioglu, B 2019, Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator. in IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA., 8913171, pp. 1761-1768. https://doi.org/10.1109/ECCE.2019.8913171

Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator. / Madariaga, Carlos; Jara, Werner; Tapia, Juan A. et al.
IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA. 2019. p. 1761-1768 8913171.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceedings › peer-review

TY - GEN

T1 - Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator

AU - Madariaga, Carlos

AU - Jara, Werner

AU - Tapia, Juan A.

AU - Riedemann, Javier

AU - Bramerdorfer, Gerd

AU - Castro, Pablo

AU - Sarlioglu, Bulent

PY - 2019/9

Y1 - 2019/9

N2 - This paper presents an analytical model of U-shape tooth-coil-winding modular permanent magnet synchronous machines (TCW-MPMSMs) in terms of main design parameters. Analytical expressions for the flux density distribution, back EMF, and electromagnetic torque were derived. 2-D finite element (FE) simulations for a 24-slot 28-pole machine for several tooth tip widths were compared to validate the proposed equations. Comparison of analytical solutions and FE results showed good agreement for a range of feasible slot openings. Also, a sensitivity analysis through the analytical expressions was developed. By using proposed analytical models, the performance of the modular machine can be significantly improved by selecting optimum values of key parameters including the dimensions of tooth tips and PMs.

AB - This paper presents an analytical model of U-shape tooth-coil-winding modular permanent magnet synchronous machines (TCW-MPMSMs) in terms of main design parameters. Analytical expressions for the flux density distribution, back EMF, and electromagnetic torque were derived. 2-D finite element (FE) simulations for a 24-slot 28-pole machine for several tooth tip widths were compared to validate the proposed equations. Comparison of analytical solutions and FE results showed good agreement for a range of feasible slot openings. Also, a sensitivity analysis through the analytical expressions was developed. By using proposed analytical models, the performance of the modular machine can be significantly improved by selecting optimum values of key parameters including the dimensions of tooth tips and PMs.

UR - https://www.scopus.com/pages/publications/85076722269

U2 - 10.1109/ECCE.2019.8913171

DO - 10.1109/ECCE.2019.8913171

M3 - Conference proceedings

SP - 1761

EP - 1768

BT - IEEE ECCE 2019 Energy Conversion Congress and Exposition, Baltimore, MD, USA

ER -

Analytical Model and Sensitivity Analysis of Tooth-Coil-Winding Permanent Magnet Synchronous Machine with Modular U-Shape Stator

Abstract

UN SDGs

Fields of science

JKU Focus areas

Access to Document

Other files and links

Cite this