Compressibility and Thermo-Elasticity Measurements of a Hydraulic Fluid

Beschreibung

For a proper simulation of pulsations in the low pressure range it is very important have an adequate density law of the fluid. In order to get this knowledge, a test rig was built and first measurements were studied. These studies pointed out that it is very important for density identification, to take thermoelastic effects into account. For example a very fast compression of the fluid leads to heat production followed by an increase in pressure due to the heat expansion coefficient of the fluid. More generally the bulk modulus depends on the time constants of the change of its thermodynamic states. A literature study on thermoelasticity showed that there is a lot of theoretical work done for solids, for ideal gases and fluids. The aim of this paper is to adopt this theory for an special experimental setup and to verify it by measurements. First some literature on this effect is shown followed by a discussion of the test rig and an exemplary measurement cycle. These measurements are compared to a theoretical model for thermoelasticity. Results and future improvements will be discussed.

Zeitraum	19 Mai 2011
Ereignistitel	The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland
Veranstaltungstyp	Konferenz
Ort	FinnlandAuf Karte anzeigen